How to choose a farm irrigation controller
A farm irrigation controller has to run more than one valve, show the pump that feeds them, and still shut water off if the connection drops. RowCodes is the field hub, the valves and pumps, and the phone you use to run them.
Questions that sort a system
Ask whether Close still works while an open is sending. Ask what a valve and a pump do when the internet dies. Ask whether unmetered water is left out or printed as zero. Ask who can be removed from the account without a service call. Metered water is totaled as metered. A run with no meter but an entered flow rate is counted and labeled estimated, and it is never shown as metered. Water with neither is “not measured,” left out of the totals, and never shown as zero.
Yield percents and a compliance badge are not a specification. SGMA compliance depends on the basin and the agency. The hardware behavior is on the farm irrigation controller.
Keep reading
RowCodes runs the set from the phone
RowCodes is the field hub, the valves and pumps, and the phone, with shut-off on the device that is watering. Log in to run a farm you already have. Installers sign in on their own login.